|
« Return to documentation listing
Table of Contents
shmem_complex_iget(3), shmem_double_iget(3), shmem_float_iget(3),
shmem_iget4(3), shmem_iget8(3), shmem_iget32(3), shmem_iget64(3), shmem_iget128(3),
shmem_int_iget(3), shmem_integer_iget(3), shmem_logical_iget(3), shmem_long_iget(3),
shmem_longdouble_iget(3), shmem_longlong_iget(3), shmem_real_iget(3), shmem_short_iget(3)
- Transfers strided data from a specified processing element (PE)
C or C++:
#include <mpp/shmem.h>
void shmem_iget32(void *target, const void *source,
ptrdiff_t tst, ptrdiff_t sst, size_t len, int pe);
void shmem_iget64(void *target, const void *source,
ptrdiff_t tst, ptrdiff_t sst, size_t len, int pe);
void shmem_iget128(void *target, const void *source,
ptrdiff_t tst, ptrdiff_t sst, size_t len, int pe);
void shmem_int_iget(int *target, const int *source,
ptrdiff_t tst, ptrdiff_t sst, size_t len, int pe);
void shmem_double_iget(double *target, const double *source,
ptrdiff_t tst, ptrdiff_t sst, size_t len, int pe);
void shmem_float_iget(float *target, const float *source,
ptrdiff_t tst, ptrdiff_t sst, size_t len, int pe);
void shmem_long_iget(long *target, const long *source,
ptrdiff_t tst, ptrdiff_t sst, size_t len, int pe);
void shmem_longdouble_iget(long double *target,
const long double *source, ptrdiff_t tst, ptrdiff_t sst,size_t len, int
pe);
void shmem_longlong_iget(long long *target,
const long long *source, ptrdiff_t tst, ptrdiff_t sst, size_t len, int
pe);
void shmem_short_iget(short *target,
const short *source, ptrdiff_t tst, ptrdiff_t sst, size_t len, int pe);
Fortran:
INCLUDE "mpp/shmem.fh"
INTEGER tst, sst, len, pe
CALL SHMEM_COMPLEX_IGET(target, source, tst, sst, len,
& pe)
CALL SHMEM_DOUBLE_IGET(target, source, tst, sst, len,
& pe)
CALL SHMEM_IGET4(target, source, tst, sst, len, pe)
CALL SHMEM_IGET8(target, source, tst, sst, len, pe)
CALL SHMEM_IGET32(target, source, tst, sst, len, pe)
CALL SHMEM_IGET64(target, source, tst, sst, len, pe)
CALL SHMEM_IGET128(target, source, tst, sst, len, pe)
CALL SHMEM_INTEGER_IGET(target, source, tst, sst, len,
& pe)
CALL SHMEM_LOGICAL_IGET(target, source, tst, sst, len,
& pe)
CALL SHMEM_REAL_IGET(target, source, tst, sst, len, pe)
The strided get routines retrieve array data available at
address source on remote PE (pe). The elements of the source array are separated
by a stride sst. Once the data is received, it is stored at the local memory
address target, separated by stride tst. The routines return when the data
has been copied into the local target array.
The arguments are as follows:
- target
- Array to be updated on the local PE.
- source
- Array containing the
data to be copied on the remote PE.
- tst
- The stride between consecutive elements
of the target array. The stride is scaled by the element size of the target
array. A value of 1 indicates contiguous data. tst must be of type integer.
If you are calling from Fortran, it must be a default integer value.
- sst
- The stride between consecutive elements of the source array. The stride
is scaled by the element size of the source array. A value of 1 indicates
contiguous data. sst must be of type integer. If you are calling from Fortran,
it must be a default integer value.
- len
- Number of elements in the target
and source arrays. len must be of type integer. If you are using Fortran,
it must be a constant, variable, or array element of default integer type.
- pe
- PE number of the remote PE. pe must be of type integer. If you are using
Fortran, it must be a constant, variable, or array element of default integer
type.
The target and source data objects must conform to typing constraints,
which are as follows:
- shmem_iget32, shmem_iget4: Any noncharacter type
that has a storage size
- equal to 32 bits.
- shmem_iget64, shmem_iget8: Any
noncharacter type that has a storage size
- equal to 64 bits.
- shmem_iget128:
Any noncharacter type that has a storage size equal to
- 128 bits.
- shmem_short_iget:
Elements of type short.
- shmem_int_iget: Elements of type int.
- shmem_long_iget:
Elements of type long.
- shmem_longlong_iget: Elements of type long long.
- shmem_float_iget:
Elements of type float.
- shmem_double_iget: Elements of type double.
- shmem_longdouble_iget:
Elements of type long double.
- SHMEM_COMPLEX_IGET: Elements of type complex
of default size.
- SHMEM_DOUBLE_IGET: (Fortran) Elements of type double precision.
- SHMEM_INTEGER_IGET: Elements of type integer.
- SHMEM_LOGICAL_IGET: Elements
of type logical.
- SHMEM_REAL_IGET: Elements of type real.
- shmem_longdouble_iget:
Elements of type long double.
- SHMEM_COMPLEX_IGET: Elements of type complex
of default size.
- SHMEM_DOUBLE_IGET: (Fortran) Elements of type double precision.
- SHMEM_INTEGER_IGET: Elements of type integer.
- SHMEM_LOGICAL_IGET: Elements
of type logical.
- SHMEM_REAL_IGET: Elements of type real.
If you are using
Fortran, data types must be of default size. For example, a real variable
must be declared as REAL, REAL*4, or REAL(KIND=4).
See intro_shmem(3)
for a definition of the term remotely accessible.
The following
simple example uses shmem_logical_iget in a Fortran program. Compile this
example with the -lsma compiler option.
PROGRAM STRIDELOGICAL
LOGICAL SOURCE(10), TARGET(5)
SAVE SOURCE ! SAVE MAKES IT REMOTELY ACCESSIBLE
DATA SOURCE /.T.,.F.,.T.,.F.,.T.,.F.,.T.,.F.,.T.,.F./
DATA TARGET / 5*.F. /
CALL START_PES(2)
IF (MY_PE() .EQ. 0) THEN
CALL SHMEM_LOGICAL_IGET(TARGET, SOURCE, 1, 2, 5, 1)
PRINT*,’TARGET AFTER SHMEM_LOGICAL_IGET:’,TARGET
ENDIF
CALL SHMEM_BARRIER_ALL
END
intro_shmem(3), shmem_get(3), shmem_quiet(3)
Table of Contents
« Return to documentation listing
|
