|
« Return to documentation listing
Table of Contents
MPI_Gather, MPI_Igather - Gathers values from a group of processes.
#include <mpi.h>
int MPI_Gather(const void *sendbuf, int sendcount, MPI_Datatype sendtype,
void *recvbuf, int recvcount, MPI_Datatype recvtype, int root,
MPI_Comm comm)
int MPI_Igather(const void *sendbuf, int sendcount, MPI_Datatype sendtype,
void *recvbuf, int recvcount, MPI_Datatype recvtype, int root,
MPI_Comm comm, MPI_Request *request)
USE MPI
! or the older form: INCLUDE ’mpif.h’
MPI_GATHER(SENDBUF, SENDCOUNT, SENDTYPE, RECVBUF, RECVCOUNT,
RECVTYPE, ROOT, COMM, IERROR)
<type> SENDBUF(*), RECVBUF(*)
INTEGER SENDCOUNT, SENDTYPE, RECVCOUNT, RECVTYPE, ROOT
INTEGER COMM, IERROR
MPI_IGATHER(SENDBUF, SENDCOUNT, SENDTYPE, RECVBUF, RECVCOUNT,
RECVTYPE, ROOT, COMM, REQUEST, IERROR)
<type> SENDBUF(*), RECVBUF(*)
INTEGER SENDCOUNT, SENDTYPE, RECVCOUNT, RECVTYPE, ROOT
INTEGER COMM, REQUEST, IERROR
USE mpi_f08
MPI_Gather(sendbuf, sendcount, sendtype, recvbuf, recvcount, recvtype,
root, comm, ierror)
TYPE(*), DIMENSION(..), INTENT(IN) :: sendbuf
TYPE(*), DIMENSION(..) :: recvbuf
INTEGER, INTENT(IN) :: sendcount, recvcount, root
TYPE(MPI_Datatype), INTENT(IN) :: sendtype, recvtype
TYPE(MPI_Comm), INTENT(IN) :: comm
INTEGER, OPTIONAL, INTENT(OUT) :: ierror
MPI_Igather(sendbuf, sendcount, sendtype, recvbuf, recvcount, recvtype,
root, comm, request, ierror)
TYPE(*), DIMENSION(..), INTENT(IN), ASYNCHRONOUS :: sendbuf
TYPE(*), DIMENSION(..), ASYNCHRONOUS :: recvbuf
INTEGER, INTENT(IN) :: sendcount, recvcount, root
TYPE(MPI_Datatype), INTENT(IN) :: sendtype, recvtype
TYPE(MPI_Comm), INTENT(IN) :: comm
TYPE(MPI_Request), INTENT(OUT) :: request
INTEGER, OPTIONAL, INTENT(OUT) :: ierror
- sendbuf
- Starting address of send buffer (choice).
- sendcount
- Number of elements in send buffer (integer).
- sendtype
- Datatype of send buffer
elements (handle).
- recvcount
- Number of elements for any single receive (integer,
significant only at root).
- recvtype
- Datatype of recvbuffer elements (handle,
significant only at root).
- root
- Rank of receiving process (integer).
- comm
- Communicator (handle).
- recvbuf
- Address of receive buffer
(choice, significant only at root).
- request
- Request (handle, non-blocking
only).
- IERROR
- Fortran only: Error status (integer).
Each process
(root process included) sends the contents of its send buffer to the root
process. The root process receives the messages and stores them in rank
order. The outcome is as if each of the n processes in the group (including
the root process) had executed a call to
MPI_Send(sendbuf, sendcount, sendtype, root, ...)
and the root had executed n calls to
MPI_Recv(recfbuf + i * recvcount * extent(recvtype), The root process
receives the messages and stores them in rank order. The outcome is as if
each of the n processes in the group (including the root process) had executed
a call to
recvcount, recvtype, i, ...)
where extent(recvtype) is the type extent obtained from a call to MPI_Type_extent().
An alternative description is that the n messages sent by the processes
in the group are concatenated in rank order, and the resulting message
is received by the root as if by a call to MPI_RECV(recvbuf, recvcount
* n, recvtype, . . . ).
The receive buffer is ignored for all nonroot processes.
General, derived datatypes are allowed for both sendtype and recvtype. The
type signature of sendcount, sendtype on process i must be equal to the
type signature of recvcount, recvtype at the root. This implies that the
amount of data sent must be equal to the amount of data received, pairwise
between each process and the root. Distinct type maps between sender and
receiver are still allowed.
All arguments to the function are significant
on process root, while on other processes, only arguments sendbuf, sendcount,
sendtype, root, comm are significant. The arguments root and comm must have
identical values on all processes.
The specification of counts and types
should not cause any location on the root to be written more than once.
Such a call is erroneous.
Note that the recvcount argument at the root indicates
the number of items it receives from each process, not the total number
of items it receives.
Example 1: Gather 100 ints from every process in
group to root.
MPI_Comm comm;
int gsize,sendarray[100];
int root, *rbuf;
...
MPI_Comm_size( comm, &gsize);
rbuf = (int *)malloc(gsize*100*sizeof(int));
MPI_Gather( sendarray, 100, MPI_INT, rbuf, 100, MPI_INT, root, comm);
Example 2: Previous example modified -- only the root allocates memory for
the receive buffer.
MPI_Comm comm;
int gsize,sendarray[100];
int root, myrank, *rbuf;
...
MPI_Comm_rank( comm, myrank);
if ( myrank == root) {
MPI_Comm_size( comm, &gsize);
rbuf = (int *)malloc(gsize*100*sizeof(int));
}
MPI_Gather( sendarray, 100, MPI_INT, rbuf, 100, MPI_INT, root, comm);
Example 3: Do the same as the previous example, but use a derived datatype.
Note that the type cannot be the entire set of gsize * 100 ints since
type matching is defined pairwise between the root and each process in
the gather.
MPI_Comm comm;
int gsize,sendarray[100];
int root, *rbuf;
MPI_Datatype rtype;
...
MPI_Comm_size( comm, &gsize);
MPI_Type_contiguous( 100, MPI_INT, &rtype );
MPI_Type_commit( &rtype );
rbuf = (int *)malloc(gsize*100*sizeof(int));
MPI_Gather( sendarray, 100, MPI_INT, rbuf, 1, rtype, root, comm);
When the communicator is an intracommunicator, you
can perform a gather operation in-place (the output buffer is used as the
input buffer). Use the variable MPI_IN_PLACE as the value of the root process
sendbuf. In this case, sendcount and sendtype are ignored, and the contribution
of the root process to the gathered vector is assumed to already be in
the correct place in the receive buffer.
Note that MPI_IN_PLACE is a special
kind of value; it has the same restrictions on its use as MPI_BOTTOM.
Because
the in-place option converts the receive buffer into a send-and-receive buffer,
a Fortran binding that includes INTENT must mark these as INOUT, not OUT.
When the communicator is an inter-communicator,
the root process in the first group gathers data from all the processes
in the second group. The first group defines the root process. That process
uses MPI_ROOT as the value of its root argument. The remaining processes
use MPI_PROC_NULL as the value of their root argument. All processes in
the second group use the rank of that root process in the first group as
the value of their root argument. The send buffer argument of the processes
in the first group must be consistent with the receive buffer argument
of the root process in the second group.
Almost all MPI routines
return an error value; C routines as the value of the function and Fortran
routines in the last argument. C++ functions do not return errors. If the
default error handler is set to MPI::ERRORS_THROW_EXCEPTIONS, then on error
the C++ exception mechanism will be used to throw an MPI::Exception object.
Before the error value is returned, the current MPI error handler is called.
By default, this error handler aborts the MPI job, except for I/O function
errors. The error handler may be changed with MPI_Comm_set_errhandler; the
predefined error handler MPI_ERRORS_RETURN may be used to cause error values
to be returned. Note that MPI does not guarantee that an MPI program can
continue past an error.
See the MPI man page for a full list of MPI error
codes.
MPI_Gatherv
MPI_Scatter
MPI_Scatterv
« Return to documentation listing
|
