|
◆ hwloc_distances_add_flag_e
Flags for adding a new distances to a topology.
Enumerator |
---|
HWLOC_DISTANCES_ADD_FLAG_GROUP | Try to group objects based on the newly provided distance information.
|
HWLOC_DISTANCES_ADD_FLAG_GROUP_INACCURATE | If grouping, consider the distance values as inaccurate and relax the comparisons during the grouping algorithms. The actual accuracy may be modified through the HWLOC_GROUPING_ACCURACY environment variable (see Environment Variables).
|
◆ hwloc_distances_add()
int hwloc_distances_add |
( |
hwloc_topology_t |
topology, |
|
|
unsigned |
nbobjs, |
|
|
hwloc_obj_t * |
objs, |
|
|
hwloc_uint64_t * |
values, |
|
|
unsigned long |
kind, |
|
|
unsigned long |
flags |
|
) |
| |
Provide a new distance matrix.
Provide the matrix of distances between a set of objects given by nbobjs and the objs array. nbobjs must be at least 2. The distances are stored as a one-dimension array in values . The distance from object i to object j is in slot i*nbobjs+j.
kind specifies the kind of distance as a OR'ed set of hwloc_distances_kind_e.
flags configures the behavior of the function using an optional OR'ed set of hwloc_distances_add_flag_e.
Objects must be of the same type. They cannot be of type Group.
◆ hwloc_distances_remove()
Remove all distance matrices from a topology.
Remove all distance matrices, either provided by the user or gathered through the OS.
If these distances were used to group objects, these additional Group objects are not removed from the topology.
◆ hwloc_distances_remove_by_depth()
Remove distance matrices for objects at a specific depth in the topology.
Identical to hwloc_distances_remove() but only applies to one level of the topology.
◆ hwloc_distances_remove_by_type()
Remove distance matrices for objects of a specific type in the topology.
Identical to hwloc_distances_remove() but only applies to one level of the topology.
|
|
|